10 Sep 12 Hot replacement of an HBA/NIC card (rx8640). No downtime.
Take note of the fcmsutil output below. One of the fiber cards has failed here.
We became aware of the problem due to a resmon message and errors generated on the SAN side.
[shmuel01]/root # olrad -q
Driver(s)
Capable
Slot Path Bus Max Spd Pwr Occu Susp OLAR OLD Max Mode
Num Spd Mode
0-0-0-1 0/0/8/1 140 133 133 Off No N/A N/A N/A PCI-X PCI-X
0-0-0-2 0/0/10/1 169 133 133 Off No N/A N/A N/A PCI-X PCI-X
0-0-0-3 0/0/12/1 198 266 133 On Yes No Yes N/A PCI-X PCI-X
0-0-0-4 0/0/14/1 227 266 133 On Yes No Yes N/A PCI-X PCI-X
0-0-0-5 0/0/6/1 112 266 266 Off No N/A N/A N/A PCI-X PCI-X
0-0-0-6 0/0/4/1 84 266 266 Off No N/A N/A N/A PCI-X PCI-X
0-0-0-7 0/0/2/1 56 133 133 Off No N/A N/A N/A PCI-X PCI-X
0-0-0-8 0/0/1/1 28 133 133 Off No N/A N/A N/A PCI-X PCI-X
0-0-1-1 1/0/8/1 396 133 133 Off No N/A N/A N/A PCI-X PCI-X
0-0-1-2 1/0/10/1 425 133 133 Off No N/A N/A N/A PCI-X PCI-X
0-0-1-3 1/0/12/1 454 266 133 On Yes No Yes N/A PCI-X PCI-X
0-0-1-4 1/0/14/1 483 266 133 On Yes No Yes N/A PCI-X PCI-X
0-0-1-5 1/0/6/1 368 266 266 Off No N/A N/A N/A PCI-X PCI-X
0-0-1-6 1/0/4/1 340 266 266 Off No N/A N/A N/A PCI-X PCI-X
0-0-1-7 1/0/2/1 312 133 133 Off No N/A N/A N/A PCI-X PCI-X
0-0-1-8 1/0/1/1 284 133 133 Off No N/A N/A N/A PCI-X PCI-X
[sap1pbw0]/root # ioscan -fnCfc
Class I H/W Path Driver S/W State H/W Type Description
===========================================================================
fc 0 0/0/12/1/0/4/0 fcd CLAIMED INTERFACE HP AD193-60001 PCI/PCI-X Fibre Channel 1-port 4Gb FC/1-port 1000B-T Combo Adapter (FC Port 1)
/dev/fcd0
fc 1 0/0/14/1/0/4/0 fcd CLAIMED INTERFACE HP AD193-60001 PCI/PCI-X Fibre Channel 1-port 4Gb FC/1-port 1000B-T Combo Adapter (FC Port 1)
/dev/fcd1
fc 2 1/0/12/1/0/4/0 fcd CLAIMED INTERFACE HP AD193-60001 PCI/PCI-X Fibre Channel 1-port 4Gb FC/1-port 1000B-T Combo Adapter (FC Port 1)
/dev/fcd2
fc 3 1/0/14/1/0/4/0 fcd CLAIMED INTERFACE HP AD193-60001 PCI/PCI-X Fibre Channel 1-port 4Gb FC/1-port 1000B-T Combo Adapter (FC Port 1)
/dev/fcd3
[shmuel01]/root # fcmsutil /dev/fcd0
Vendor ID is = 0x001077
Device ID is = 0x002422
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x0012de
PCI Mode = PCI-X 133 MHz
ISP Code version = 4.0.90
ISP Chip version = 3
Previous Topology = UNINITIALIZED
Link Speed = UNKNOWN
Local N_Port_id is = None
Previous N_Port_id is = None
N_Port Node World Wide Name = 0x500110a0003db94b
N_Port Port World Wide Name = 0x500110a0003db94a
Switch Port World Wide Name = 0x0000000000000000
Switch Node World Wide Name = 0x0000000000000000
Driver state = AWAITING_LINK_UP
Hardware Path is = 0/0/12/1/0/4/0
Maximum Frame Size = 2048
Driver-Firmware Dump Available = NO
Driver-Firmware Dump Timestamp = N/A
Driver Version = @(#) libfcd.a HP Fibre Channel ISP 23xx & 24xx Driver B.11.23.08 /ux/core/isu/FCD/kern/src/common/wsio/fcd_init.c:Mar 27 2007,15:29:17
[shmuel01]/root # fcmsutil /dev/fcd1
Vendor ID is = 0x001077
Device ID is = 0x002422
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x0012de
PCI Mode = PCI-X 133 MHz
ISP Code version = 4.0.90
ISP Chip version = 3
Topology = PTTOPT_FABRIC
Link Speed = 4Gb
Local N_Port_id is = 0xdc000b
Previous N_Port_id is = None
N_Port Node World Wide Name = 0x500110a0003db94f
N_Port Port World Wide Name = 0x500110a0003db94e
Switch Port World Wide Name = 0x2043000dec8812c0
Switch Node World Wide Name = 0x2046000dec2adb01
Driver state = ONLINE
Hardware Path is = 0/0/14/1/0/4/0
Maximum Frame Size = 2048
Driver-Firmware Dump Available = NO
Driver-Firmware Dump Timestamp = N/A
Driver Version = @(#) libfcd.a HP Fibre Channel ISP 23xx & 24xx Driver B.11.23.08 /ux/core/isu/FCD/kern/src/common/wsio/fcd_init.c:Mar 27 2007,15:29:17
[shmuel01]/root # fcmsutil /dev/fcd2
Vendor ID is = 0x001077
Device ID is = 0x002422
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x0012de
PCI Mode = PCI-X 133 MHz
ISP Code version = 4.0.90
ISP Chip version = 3
Topology = PTTOPT_FABRIC
Link Speed = 4Gb
Local N_Port_id is = 0x9d000b
Previous N_Port_id is = None
N_Port Node World Wide Name = 0x500110a0003db93b
N_Port Port World Wide Name = 0x500110a0003db93a
Switch Port World Wide Name = 0x2043000dec881f00
Switch Node World Wide Name = 0x2050000dec2adcc1
Driver state = ONLINE
Hardware Path is = 1/0/12/1/0/4/0
Maximum Frame Size = 2048
Driver-Firmware Dump Available = NO
Driver-Firmware Dump Timestamp = N/A
Driver Version = @(#) libfcd.a HP Fibre Channel ISP 23xx & 24xx Driver B.11.23.08 /ux/core/isu/FCD/kern/src/common/wsio/fcd_init.c:Mar 27 2007,15:29:17
[shmuel01]/root # fcmsutil /dev/fcd3
Vendor ID is = 0x001077
Device ID is = 0x002422
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x0012de
PCI Mode = PCI-X 133 MHz
ISP Code version = 4.0.90
ISP Chip version = 3
Topology = PTTOPT_FABRIC
Link Speed = 4Gb
Local N_Port_id is = 0x9d000a
Previous N_Port_id is = None
N_Port Node World Wide Name = 0x500110a0003db8e1
N_Port Port World Wide Name = 0x500110a0003db8e0
Switch Port World Wide Name = 0x2003000dec881f00
Switch Node World Wide Name = 0x2050000dec2adcc1
Driver state = ONLINE
Hardware Path is = 1/0/14/1/0/4/0
Maximum Frame Size = 2048
Driver-Firmware Dump Available = NO
Driver-Firmware Dump Timestamp = N/A
Driver Version = @(#) libfcd.a HP Fibre Channel ISP 23xx & 24xx Driver B.11.23.08 /ux/core/isu/FCD/kern/src/common/wsio/fcd_init.c:Mar 27 2007,15:29:17
/usr/bin/olrad -r slot_ID
/usr/bin/olrad -r 0-0-0-3
[shmuel01]/root # olrad -q
Driver(s)
Capable
Slot Path Bus Max Spd Pwr Occu Susp OLAR OLD Max Mode
Num Spd Mode
0-0-0-1 0/0/8/1 140 133 133 Off No N/A N/A N/A PCI-X PCI-X
0-0-0-2 0/0/10/1 169 133 133 Off No N/A N/A N/A PCI-X PCI-X
0-0-0-3 0/0/12/1 198 266 266 Off Yes Yes Yes N/A PCI-X PCI-X
0-0-0-4 0/0/14/1 227 266 266 On Yes No Yes N/A PCI-X PCI-X
0-0-0-5 0/0/6/1 112 266 266 Off No N/A N/A N/A PCI-X PCI-X
0-0-0-6 0/0/4/1 84 266 266 Off No N/A N/A N/A PCI-X PCI-X
0-0-0-7 0/0/2/1 56 133 133 Off No N/A N/A N/A PCI-X PCI-X
0-0-0-8 0/0/1/1 28 133 133 Off No N/A N/A N/A PCI-X PCI-X
0-0-1-1 1/0/8/1 396 133 133 Off No N/A N/A N/A PCI-X PCI-X
0-0-1-2 1/0/10/1 425 133 133 Off No N/A N/A N/A PCI-X PCI-X
0-0-1-3 1/0/12/1 454 266 133 On Yes No Yes N/A PCI-X PCI-X
0-0-1-4 1/0/14/1 483 266 133 On Yes No Yes N/A PCI-X PCI-X
0-0-1-5 1/0/6/1 368 266 266 Off No N/A N/A N/A PCI-X PCI-X
0-0-1-6 1/0/4/1 340 266 266 Off No N/A N/A N/A PCI-X PCI-X
0-0-1-7 1/0/2/1 312 133 133 Off No N/A N/A N/A PCI-X PCI-X
0-0-1-8 1/0/1/1 284 133 133 Off No N/A N/A N/A PCI-X PCI-X
Cards to be replaced are flashing yellow.
Replace card now.
/usr/bin/olrad -A 0-0-0-3
/usr/bin/olrad -R 0-0-0-3
Tags: fiber card replacement, fiber channel adaptor, hba replacement, hot swap hba card, rx8640, systems administration
06 Apr 11 setboot hardware path to legacy hardware path. A converter.
HP-UX 11.23
setboot provides output only including the hardware path (ioscan -H).
When calculating DRD clone targets and such you need the regular legacy device path.
Here is a converter, built with a little help from JRF on the ITRC forums.
First get the setboot path. Might want to use the full path of the setboot command in practice.
pboot=$(setboot | grep ^Primary | awk ‘{ print $NF }’);
aboot=$(setboot | grep ^Alternate |awk ‘{ print $NF}’);
abootdisk=$(ioscan -kfnCdisk | awk -v aboot=${aboot} ‘/aboot/ $0~aboot {getline;print aboot,$2}’ | awk ‘{ print $2 }’);
pbootdisk=$(ioscan -kfnCdisk | awk -v aboot=${pboot} ‘/pboot/ $0~pboot {getline;print pboot,$2}’ | awk ‘{ print $2 }’);
The slick part is getting the variable in and out of awk.
Uses ioscan.
Tags: fiber channel adaptor, high capacity volume group, integrity, system migration
09 Jun 10 System I/O layout (EMC specific)
This is a script designed to document the layout of a system. It is EMC specific and requires the output of the inq command, which I store in /tmp/inq.txt
It can however be adapted to non EMC disk systems. It correctly shows the port/lba layout and status of network and fiber I/O the way it appears on the outside of the system. Two tables are included to permit lookups of the port/lba information. It has worked on blades, and is certified for rp8420 and superdome systems.
It has only been tested on HP-UX 11.31.
… please stand by….update in progress…
DF=”super.translate.dat”
MA=”router.macadd.dat”
typeset MYDIR=/var/tmp/syslayout
typeset MYPAGE=mypage
typeset MYDATA=mydata
typeset IDX_HTML=syslayout.html
writehtml (){
while [ $# -gt 0 ]
do
echo “<td>${1}</td>” >> ${IDX_HTML}
shift
done
echo “<tr>” >> ${IDX_HTML}
}
cat -<<!EOF > ${IDX_HTML}
<!DOCTYPE HTML PUBLIC “-//W3C//DTD HTML 4.0 Transitional//EN”>
<title>Dana IT Unix System documentation</title>
<BODY>
<TABLE style=”WIDTH: 100%; COLOR: rgb(0,0,0); TEXT-ALIGN: left” cellSpacing=2
cellPadding=2 border=0>
<TBODY>
<TR>
<td width=”200″><img
style=”border-width: 0px; margin: 0px; padding: 0px;” alt=”Dana”
src=”dana_logo.jpg”> </td>
<td style=”font-weight: bold;”><big><big>Dana
IT
Unix:
Documentation</big></big></td>
<TD style=”VERTICAL-ALIGN: top; TEXT-ALIGN: center” colSpan=7><BIG
style=”FONT-FAMILY: helvetica,arial,sans-serif”><BIG>Dana IT system I/O Layout.</BIG></BIG><BR></TD></TR>
!EOF
# colum layout # Path slot MAC Address lan ipaddress vlan linkstatus
sysname=$(uname -n)
this_cell=$(vparstatus -p $sysname -v |awk ‘/Boot processor/ {print $4}’ |awk -F’\.’ ‘{print $1}’)
# echo $this_cell
this_par=$(parstatus -c 0 |awk ‘/cell’$this_cell’/ {print $9}’)
nparname=$(/usr/sbin/parstatus -P |awk “/^$this_par/ {if(pname == 1) {print}};/Partition Name/ {pname=1}”|awk ‘/’$this_par’ / {print $6}’)
#echo “Diag nparname: ${nparname}”
complexname=$(/usr/sbin/parstatus -X |awk “/Complex Name/”)
cellind=”cell${this_par}”
nparinfo=$(/usr/sbin/parstatus -P |awk “/^$this_par/ {if(pname == 1) {print}};/Partition Name/ {pname=1}”)
# model needs to be determineed
OS=$(uname -r)
if [ “$OS” = “B.11.31” ]
then
mod=$(model | awk ‘{ print $5 }’)
else
mod=$(model | awk -F/ ‘{ print $3}’)
fi
hn=$(hostname)
this_cell=$(vparstatus -p ${hn} -v |awk ‘/Boot processor/ {print $4}’ |awk -F’\.’ ‘{print $1}’)
echo $this_cell
this_par=$(parstatus -c 0 |awk ‘/cell’$this_cell’/ {print $9}’)
/usr/sbin/parstatus -P |awk “/cell/ {if(pname == 1) {print}};/Partition Name/ {pname=1}”|awk ‘/’$this_par’ / {print $6}’
hn=$(hostname)
lhn=”${hn}.dana.com”
echo “Host name: ${lhn}”
writehtml “Host name:” ${lhn}
echo “Model number is: $mod”
writehtml “Model number:” ${mod}
#echo “<td>$complexname</td><td>$nparname</td><tr>” >> ${IDX_HTML}
writehtml “${complexname}” ${nparname}
echo “Model number is: $mod”
pbootpath=$(parstatus -p 0 -V |awk -F: ‘/Primary Boot Path/ {print $2}’)
echo “Primary boot path: ${pbootpath}”
writehtml “Primary boot path:” ${pbootpath}
#echo “<td>$complexname</td><td>$nparnam</td><tr>” >> ${IDX_HTML}
# echo “<td>Path</td><td>slot</td><td>MAC Address</td><td>lan</td><td>IP Address</td><td>vlan</td><td>Link Status</td><tr>” >> ${IDX_HTML}
writehtml Path slot MAC_Address lan IP_Address vlan Link_Status
#echo “$nparinfo”
# echo “Path slot MAC lan check ip”
# 2/0/5/1/0/6/1 4 0x002264E4948B lan1 10.8.128.162
echo “Path slot MAC Address lan ipaddress vlan linkstatus”
/usr/sbin/ioscan -fnk | awk ‘/^lan/ {print $3}’ |while read -r path
do
ip=””;
echo $path | sed ‘s/\// /g’ | read p1 p2 p3 p4 p5 p6 p7
macaddy=$(lanscan | awk ‘{if($1 == “‘${path}'”) print $2}’)
lanid=$(lanscan | awk ‘{if($1 == “‘${path}'”) print $5}’)
plan=$(lanscan | awk ‘{if($1 == “‘${path}'”) print $3}’)
lchk=$(/usr/sbin/linkloop -i $plan $macaddy 2>/dev/null | grep “OK”)
# If linkloop produces postive results then see if there is an ip address
ip=”IP not set”
if [ -n “$lchk” ]
then
# echo “lchk not null. running ifconfig command”
ip=$(/usr/sbin/ifconfig $lanid | grep netmask | awk ‘{print $2}’)
fi
# roll through the router table and see if you can establish
# linkloop with the gateway
DRMAC=”No link..”
DVLAN=”Not found”
#while [[ “$value” != “val1” || “$value” != “val2” || “$value” != “val3” ]]
while read -r DL
do
rmacaddy=$(echo $DL | awk -F: ‘{print $2}’)
rvlan=$(echo $DL | awk -F: ‘{print $3}’)
rlchk=$(/usr/sbin/linkloop -i $plan $rmacaddy 2>/dev/null | grep “OK”)
if [ -n “$rlchk” ]
then
# echo “rlchk not null. setting vlan information.”
DRMAC=${rmacaddy}
DVLAN=${rvlan}
break;
fi
done < $MA
# echo “${path} ${p7} ${macaddy} ${lanid} ${lchk} ${ip} ”
#p1=$(echo $path | awk -F/ ‘{print $1}’);
#p2=$(echo $path | awk -F/ ‘{print $2}’);
#p3=$(echo $path | awk -F/ ‘{print $3}’);
#p4=$(echo $path | awk -F/ ‘{print $4}’);
#p5=$(echo $path | awk -F/ ‘{print $5}’);
#p6=$(echo $path | awk -F/ ‘{print $6}’);
#p7=$(echo $path | awk -F/ ‘{print $7}’);
portpath=$(echo $path | awk -F/ ‘{print $3}’)
actualport=$(awk -F: ‘{if($2 == “‘${portpath}'” && $3 == “‘$mod'”) print $1}’ ${DF})
# echo “Actual path: ${p1} ${p2} ${p3} ${p4} ${p5} ${p6} ${p7} ${actualport} ${ip} ${macaddy} ${lanid} ${ip}”
echo “${path} ${actualport} ${macaddy} ${lanid} ${ip} ${DVLAN} ${DRMAC}”
# echo “<td>${path}</td><td>${actualport}</td><td>${macaddy}</td><td>${lanid}</td><td>${ip}</td><td>${DVLAN}</td><td>${DRMAC}</td><tr>” >> ${IDX_HTML}
writehtml ${path} ${actualport} ${macaddy} ${lanid} ${ip} ${DVLAN} ${DRMAC}
done
echo “Fiber Channel….”
# echo “<td>Fiber Channel….</td><tr>” >> ${IDX_HTML}
writehtml “Fiber Channel”
echo “PATH slot Device… Status spd Hardware address”
# echo “<td>PATH</td><td>slot</td><td>Device</td><td>Status</td><td>speed</td><td>Hardware address</td><tr>” >> ${IDX_HTML}
writehtml PATH slot Device Status speed Hardware address
#/usr/sbin/ioscan -fnCfc | grep fcd | awk ‘{print $3}’ |while read -r path
/usr/sbin/ioscan -fnk | awk ‘/^fc / {hw=$3;getline;print hw,$1}’ |while read -r hw devfile
do
# echo “diag ${hw} dev file … ${devfile}”
port=$(echo $hw | awk -F/ ‘{print $3}’)
OSTAT=$(fcmsutil $devfile | awk ‘/ONLINE/ {print $4}’)
LSPD=$(fcmsutil $devfile | awk ‘/Link Speed/ {print $4}’)
WWN=$(fcmsutil $devfile | awk ‘/N_Port Port World Wide Name/ {print $7}’)
# OSTAT=$(fcmsutil /dev/fcd1 | awk ‘/ONLINE/ {print $4}’)
# LSPD=$(fcmsutil /dev/fcd1 | awk ‘/Link Speed/ {print $4}’)
# WWN=$(fcmsutil /dev/fcd1 | awk ‘/N_Port Port World Wide Name/ {print $7}’)
actualport=$(awk -F: ‘{if($2 == “‘${port}'” && $3 == “‘$mod'”) print $1}’ ${DF})
echo “$hw ${actualport} $devfile ${OSTAT} ${LSPD} ${WWN}”
#echo “<td>$hw</td><td>${actualport}</td> <td>$devfile</td><td>${OSTAT}</td><td>${LSPD}</td> <td>${WWN}</td><tr>” >> ${IDX_HTML}
writehtml ${hw} ${actualport} ${devfile} ${OSTAT} ${LSPD} ${WWN}
done
#awk -F: ‘{printf(“%8s %5s %4s\n”,$1,$3,$4)}’ steve
#2/0/5/1/0/6/0
#2/0/5/1/0/6/1
cat -<< !EOF >> ${IDX_HTML}
<TR></TR></TBODY></TABLE></BODY></HTML>
!EOF
chmod a+r ${IDX_HTML}
# Added to copy the data file to my home directory for diagnosis.
cp syslayout.html /home/sprotte
chmod a+r /home/sprotte/syslayout.html
super.translate.dat
—–
root@gitop2:/root # more /usr/global/etc/super.translate.dat
11:8:SD64B
10:9:SD64B
9:10:SD64B
8:12:SD64B
7:13:SD64B
6:14:SD64B
5:6:SD64B
4:5:SD64B
3:4:SD64B
2:2:SD64B
1:1:SD64B
0:0:SD64B
1:8:rp8420
2:10:rp8420
3:12:rp8420
4:14:rp8420
5:6:rp8420
6:4:rp8420
7:2:rp8420
8:1:rp8420
more /usr/global/etc/router.macadd.dat
Format:
IP Address : MAC Address : vlan# : Description
:0x00000c07ac0a:vlan9:HP-UX Production
Obviously this data varies from place the place. The Mac address of the router is used to check network connectivity with the linkloop command
Tags: fiber channel adaptor, forums.itrc.hp.com, high capacity volume group, patches, SD-UX, superdome
22 Feb 10 Obtain Fiber card WWN information from HP-UX npar
This was developed jointly by myself and Ted Fisher of Dana. Ted did most of the work, because I had to duck out of the office. The idea is however to take the utility fcmsutil and get it working in the recovery shell was developed jointly.
What follows is a putty log, with certain proprietary network information removed and a procedure.
Connect to the Console that controls the npar.
Welcome to the
Management Processor
HP 9000 and Integrity Superdome Server SD64B
Supported firmware-updateable entity combination: Recipe 8.7e
MP MAIN MENU:
CO: Consoles
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Logs
SL: Show Logs
FW: Firmware Update
HE: Help
X: Exit Connection
[dome-m1c] MP> co
Partitions available:
# Name
— —-
0) dome-m1-NPAR0
1) dome-m1-NPAR1
2) dome-m1-NPAR2
Q) Quit
Please select partition number: 2
Connecting to OS Console: dome-m1-NPAR2
(Use <Ctrl-b> to return to main menu.)
Client MAC Address: 00 22 64 E4 74 B2
Shell> lanboot select -cip 10.91.138.167 -sip 10.91.138.162 -m 255.255.255.0 -b “/
opt/ignite/boot/Rel_B.11.31/nbp.efi”
01 Acpi(HWP0002,PNP0A03,804)/Pci(1|0)/Pci(6|0)/Mac(002264E47438)
02 Acpi(HWP0002,PNP0A03,804)/Pci(1|0)/Pci(6|1)/Mac(002264E47439)
03 Acpi(HWP0002,PNP0A03,805)/Pci(1|0)/Pci(6|0)/Mac(002264E47444)
04 Acpi(HWP0002,PNP0A03,805)/Pci(1|0)/Pci(6|1)/Mac(002264E47445)
05 Acpi(HWP0002,PNP0A03,806)/Pci(1|0)/Pci(6|0)/Mac(002264E474A4)
06 Acpi(HWP0002,PNP0A03,806)/Pci(1|0)/Pci(6|1)/Mac(002264E474A5)
07 Acpi(HWP0002,PNP0A03,80C)/Pci(1|0)/Pci(6|0)/Mac(002264E474DE)
08 Acpi(HWP0002,PNP0A03,80C)/Pci(1|0)/Pci(6|1)/Mac(002264E474DF)
09 Acpi(HWP0002,PNP0A03,80D)/Pci(1|0)/Pci(6|0)/Mac(002264E474B2)
10 Acpi(HWP0002,PNP0A03,80D)/Pci(1|0)/Pci(6|1)/Mac(002264E474B3)
11 Acpi(HWP0002,PNP0A03,80E)/Pci(1|0)/Pci(6|0)/Mac(002264E4745C)
12 Acpi(HWP0002,PNP0A03,80E)/Pci(1|0)/Pci(6|1)/Mac(002264E4745D)
Select Desired LAN: 10
Client MAC Address: 00 22 64 E4 74 B3
LAN Configuration:
Client MAC Address : 00 22 64 E4 74 B3
Client IP Address : 10.91.138.167
Subnet Mask : 255.255.255.0
Boot Server IP Address : 10.91.138.162
DHCP Server IP Address : 0.0.0.0
Retrieving File Size.
Boot file name: /opt/ignite/boot/nbp.efi
Boot file size: 24576 bytes
Retrieving File (TFTP).
Executing Image: “/opt/ignite/boot/nbp.efi”
Optional Data: NONE
@(#) HP-UX IA64 Network Bootstrap Program Revision 1.0
Downloading HPUX bootloader
Starting HPUX bootloader
Obtaining size of fpswa.efi / (328192 bytes)
Downloading file fpswa.efi -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ (328192 bytes)
(C) Copyright 1999-2008 Hewlett-Packard Development Company, L.P.
All rights reserved
HP-UX Boot Loader for IPF — Revision 2.036
Booting from Lan
Obtaining size of AUTO | (226 bytes)
Downloading file AUTO /- (226 bytes)
Obtaining size of AUTO \ (226 bytes)
Downloading file AUTO |/ (226 bytes)
Obtaining size of AUTO – (226 bytes)
Downloading file AUTO \| (226 bytes)
1. target OS is B.11.23 IA
2. target OS is B.11.31 IA
3. Exit Boot Loader
Choose an operating system to install that your hardware supports:2
Obtaining size of AUTO / (226 bytes)
Downloading file AUTO -\ (226 bytes)
Obtaining size of Rel_B.11.31/IINSTALL | (50966795 bytes)
Downloading file Rel_B.11.31/IINSTALL /-\ (50966795 bytes)
> System Memory = 98106 MB
loading section 0
………………………………………………………………………………………. (complete)
loading section 1
…………….. (complete)
loading symbol table
Obtaining size of Rel_B.11.31/IINSTALLFS | (61341696 bytes)
Downloading file Rel_B.11.31/IINSTALLFS /-\|//-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- (61341696 bytes)
loading ram disk file (Rel_B.11.31/IINSTALLFS).
………………………………………………………………………………………………………
(complete)
Launching Rel_B.11.31/IINSTALL
SIZE: Text:50828K + Data:8272K + BSS:23776K = Total:82878K
Console is on Serial Device – via PCDP
Booting kernel…
krs_read_mfs: Error 5 opening MFS.
Loaded ACPI revision 2.0 tables.
krs_read_mfs: Error 5 opening MFS.
Memory Class Setup
————————————————————————-
Class Physmem Lockmem Swapmem
————————————————————————-
System : 93316 MB 93316 MB 93316 MB
Kernel : 93316 MB 93316 MB 93316 MB
User : 90509 MB 80238 MB 80553 MB
————————————————————————-
ktracer is off until requested.
Installing Socket Protocol families AF_INET and AF_INET6
Kernel EVM initialized
sec_init(): kernel RPC authentication/security initialization.
secgss_init(): kernel RPCSEC_GSS security initialization.
rpc_init(): kernel RPC initialization.
rpcmod_install(): kernel RPC STREAMS module “rpcmod” installation. …(driver_install)
NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 11.
NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 12.
iether0: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 8/0/4/1/0/6/0
iether1: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 8/0/4/1/0/6/1
iether2: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 8/0/5/1/0/6/0
iether3: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 8/0/5/1/0/6/1
iether4: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 8/0/6/1/0/6/0
iether5: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 8/0/6/1/0/6/1
iether6: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 8/0/12/1/0/6/0
iether7: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 8/0/12/1/0/6/1
iether8: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 8/0/13/1/0/6/0
iether9: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 8/0/13/1/0/6/1
iether10: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 8/0/14/1/0/6/0
iether11: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 8/0/14/1/0/6/1
System Console is on the Built-In Serial Interface
iether12: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 10/0/4/1/0/6/0
iether13: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 10/0/4/1/0/6/1
iether14: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 10/0/5/1/0/6/0
iether15: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 10/0/5/1/0/6/1
iether16: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 10/0/6/1/0/6/0
iether17: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 10/0/6/1/0/6/1
iether18: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 10/0/12/1/0/6/0
iether19: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 10/0/12/1/0/6/1
iether20: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 10/0/13/1/0/6/0
iether21: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 10/0/13/1/0/6/1
iether22: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 10/0/14/1/0/6/0
iether23: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 10/0/14/1/0/6/1
AF_INET socket/streams output daemon running, pid 158
afinet_prelink: module installed
Starting the STREAMS daemons-phase 1
Swap device table: (start & size given in 512-byte blocks)
entry 0 – auto-configured on root device; ignored – no room
WARNING: No swap device configured, so dump cannot be defaulted to primary swap.
WARNING: No dump devices are configured. Dump is disabled.
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: B.11.31_LR FLAVOR=perf nfsauth: lookupname: 2
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 100461436 Kbytes, lockable: 80228428 Kbytes, available: 90518748 Kbytes
* Preparing to execute init…
======= 02/19/10 13:42:01 EST HP-UX Installation Initialization. (Fri Feb 19
13:42:01 EST 2010)
@(#)Ignite-UX Revision C.7.7.93
@(#)ignite/launch (opt) Revision:
/branches/IUX_RA0809/ignite/src@74753 Last Modified: 2008-07-11
12:27:58 -0600 (Fri, 11 Jul 2008)
* Configuring RAM filesystems…
* Scanning system for IO devices…
* Boot device is: 8/0/13/1/0/6/1
NOTE: There were no disk devices found during the scan. Make sure that the
destination disks are connected and powered on. You may choose to
scan for more disk drives from next menu on the console.
NOTE: Empty primary boot path reported by setboot: Primary bootpath :
NOTE: Primary path not currently set to an existing disk device.
* Setting keyboard language.
.i
i
### We poke around and try and get the hardware information and the World Wide Name.
Welcome to Ignite-UX!Use the <tab> key to navigate between fields, and the arrow keys
within fields. Use the <return/enter> key to select an item.
Use the <return/enter> or <space-bar> to pop-up a choices list. If the
menus are not clear, select the “Help” item for more information.Hardware Summary:System Model: ia64 hp superdome server SD64B
+———————-+—————+——————–+[ Scan Again ]
| Disks: 0 ( 0.0GB)| Floppies: 0 | LAN cards: 24 |
| CD/DVDs:0 | Tapes: 0 | Memory: 98106Mb |
| Graphics Ports: 0 | IO Buses: 24 | CPUs:24 |[ H/W Details ]
+———————-+—————+——————–+[ Install HP-UX ][ Run an Expert Recovery Shell ][ Advanced Options][ Reboot ][ Help ] Install HP-UX Run an Expert Recovery Shell Networking must be enabled in order to load a shell.
(Press any key to continue.)LAN Interface SelectionMore than one network interface was detected on the system. Youwill need to select the interface to enable. Only one interfacecan be enabled, and it must be the one connected to the networkthat can be used in contacting the install and/or SD servers.Use the <tab> and/or arrow keys to move to the desired LAN deviceto enable, then press <Return>.HW Path Interface Station Address Description———————————————————-[ 8/0/4/1/0/6 lan0 0x002264E47438 HP_AD194-60001_PCI/PCI-X_1000B ][ 8/0/4/1/0/6 lan1 0x002264E47439 HP_AD194-60001_PCI/PCI-X_1000B ][ 8/0/5/1/0/6 lan2 0x002264E47444 HP_AD194-60001_PCI/PCI-X_1000B ][ 8/0/5/1/0/6 lan3 0x002264E47445 HP_AD194-60001_PCI/PCI-X_1000B ][ 8/0/6/1/0/6 lan4 0x002264E474A4 HP_AD194-60001_PCI/PCI-X_1000B ][ 8/0/6/1/0/6 lan5 0x002264E474A5 HP_AD194-60001_PCI/PCI-X_1000B ][ 8/0/12/1/0/ lan6 0x002264E474DE HP_AD194-60001_PCI/PCI-X_1000B ][ 8/0/12/1/0/ lan7 0x002264E474DF HP_AD194-60001_PCI/PCI-X_1000B ][ 8/0/13/1/0/ lan8 0x002264E474B2 HP_AD194-60001_PCI/PCI-X_1000B ][ 8/0/13/1/0/ lan9 0x002264E474B3 HP_AD194-60001_PCI/PCI-X_1000B ][ 8/0/14/1/0/ lan10 0x002264E4745C HP_AD194-60001_PCI/PCI-X_1000B ]8/0/13/1/0/ lan9 0x002264E474B3 HP_AD194-60001_PCI/PCI-X_1000B* Searching the network for a DHCP server to supply default networkinginformation….This could take up to 30 seconds if a DHCP server cannot be found. Ifyou wish to cancel the DHCP server search, you may press CTRL-C now.* Could not get DHCP information. No host specific network defaultswill be supplied. (dhcpclient returned: 9)NETWORK CONFIGURATIONNETWORK CONFIGURATIONThis system’s hostname: Internet protocol address (eg. 15.2.56.1) of this host: Default gateway routing internet protocol address: 10.8.128.1 The subnet mask (eg. 255.255.248.0 or 0xfffff800): 255.255.252.0 IP address of the Ignite-UX server system: 10.8.128.162 Is this networking information only temporary? [ No ][ OK ][ Cancel ][ Help ]10.8.128.167o No OK OK ancelancelHelp Help test <est NETWORK CONFIGURATIONThis system’s hostname:<est Internet protocol address (eg. 15.2.56.1) of this host: Default gateway routing internet protocol address: 10.8.128.1 The subnet mask (eg. 255.255.248.0 or 0xfffff800): 255.255.252.0 IP address of the Ignite-UX server system: 10.8.128.162 Is this networking information only temporary? [ No ][ OK ][ Cancel ][ Help ]10.8.128.167o No OK OK ancelancelHelp Help testo YesYesYes OK OK * Bringing up Network (lan9)
add net default: gateway 10.8.128.1
* Reading configuration information from server…
* Creating disk device files…
* Loading the recovery commands…
### We arrive at the recovery shell.
HP-UX NETWORK SYSTEM RECOVERY
WARNING: YOU ARE SUPERUSER !!
Checking for required components on the Ignite Server……..
Loading some basic commands…
Required files exist … Proceeding
Cannot find the disk referenced by the primary
boot path: “” in /tmp/hw.info or /tmp/io.info.
The default chosen for the root disk may not be correct.
press <return> to continue
HP-UX NETWORK SYSTEM RECOVERY
MAIN MENU
s. Search for a file
b. Reboot
l. Load a file
r. Recover an unbootable HP-UX system
x. Exit to shell
This menu is for listing and loading the tools contained on the core media.
Once a tool is loaded, it may be run from the shell. Some tools require other
files to be present in order to successfully execute.
Select one of the above: Dead gateway detection can’t ping the last remaining default gateway at 0xa088001 .See ndd -h ip_ire_gw_probe for more info
Dead gateway detection can’t ping the last remaining default gateway at 0xa088001 .See ndd -h ip_ire_gw_probe for more info
l NOTE: Loading some files may require other files/libraries to be loaded.
If an attempt is made to load a file, and an error message is
encountered when the command is invoked, it may be useful to use
the chatr command (on a system that is up and running) to ensure that
dependencies are met. See chatr(1) for more details.
For some commands (vi, ftp, rcp), the dependent files will be
automatically loaded. For others, you need to load them manually.
If you specify a filename of “all” a list of all the files available
will be displayed.
## The recovery shell put the OS into ram based file systems.
Filesystem kbytes used avail %cap iused ifree iused Mounted on
/ 57892 23319 34573 40% 68 14332 0% ?
Filesystem kbytes used avail %cap iused ifree iused Mounted on
/RAMFS1 102400 17835 79393 18% 93 21139 0% ?
Filesystem kbytes used avail %cap iused ifree iused Mounted on
/RAMFS2 1572864 24791 1451423 2% 127 387017 0% ?
## We need tar, so we need to transfer tar to the recovery shell.
Enter the filename(s) to load:
/usr/bin/tar
******** THE REQUESTED FILE(S): ***********
./usr/bin/tar
Is the above load list correct? [y/(n)] y
********* downloading the files *******
x ./usr/bin/tar, 146032 bytes, 286 tape blocks
<Press return to continue>
HP-UX NETWORK SYSTEM RECOVERY
MAIN MENU
s. Search for a file
b. Reboot
l. Load a file
r. Recover an unbootable HP-UX system
x. Exit to shell
This menu is for listing and loading the tools contained on the core media.
Once a tool is loaded, it may be run from the shell. Some tools require other
files to be present in order to successfully execute.
Select one of the above: l
NOTE: Loading some files may require other files/libraries to be loaded.
If an attempt is made to load a file, and an error message is
encountered when the command is invoked, it may be useful to use
the chatr command (on a system that is up and running) to ensure that
dependencies are met. See chatr(1) for more details.
For some commands (vi, ftp, rcp), the dependent files will be
automatically loaded. For others, you need to load them manually.
If you specify a filename of “all” a list of all the files available
will be displayed.
At this point we have on the Ignite server craeted a file called fcms.tar. We have to use tftp to get the file into the Ignite server.
cd /opt/fcms
tar -cvf /var/opt/ignite/fcms.tar .
cd /usr/lib/hpux64
tar -cvf /var/opt/ignite/lib64.tar .
tftp <ip of ignite server>
tftp> get /var/opt/ignite/fcms.tar
Received 3689985 bytes in 0.7 seconds
tftp> Dead gateway detection can’t ping the last remaining default gateway at 0xa088001 .See ndd -h ip_ire_gw_probe for more info
tftp> quit
# ll
total 385884
-rw-r–r– 1 root sys 3665920 Feb 19 14:00 fcms.tar
-rw-r–r– 1 root sys 192040960 Feb 19 13:58 lib64.tar
# pwd
/usr/lib/hpux64
# tar mv fcms.tar /opt/fcms
# ll
total 375096
-rw-r–r– 1 root sys 192040960 Feb 19 13:58 lib64.tar
# tar -xvf lib64.tar
x ./libntl.so symbolic link to ./libntl.so.1
x ./libntl.so.1, 91352 bytes, 179 tape blocks
x ./netmgr/libnetmgr.so symbolic link to ./libnetmgr.so.1
x ./netmgr/libnetmgr.so.1, 328256 bytes, 642 tape blocks
x ./netmgr/libncweb_vlan.so symbolic link to ./libnetmgr_vlan.so.1
x ./netmgr/libnetmgr_dlpi.so symbolic link to ./libnetmgr_dlpi.so.1
x ./netmgr/libnetmgr_dlpi.so.1, 84704 bytes, 166 tape blocks
x ./netmgr/libnetmgr_vlan.so symbolic link to ./libnetmgr_vlan.so.1
x ./netmgr/libnetmgr_vlan.so.1, 359816 bytes, 703 tape blocks
x ./netmgr/libncweb_btlan.so symbolic link to ./libncweb_btlan.so.1
x ./netmgr/libncweb_btlan.so.1, 192872 bytes, 377 tape blocks
x ./netmgr/libnetmgr_btlan.so symbolic link to ./libncweb_btlan.so.1
x ./netmgr/libncweb_igssn.so symbolic link to /usr/lib/hpux64/netmgr/libncweb_igssn.so.1
x ./netmgr/libncweb_igssn.so.1, 350936 bytes, 686 tape blocks
x ./netmgr/libnetmgr_igssn.so symbolic link to /usr/lib/hpux64/netmgr/libncweb_igssn.so.1
x ./netmgr/libncweb_gelan.so symbolic link to ./libncweb_gelan.so.1
x ./netmgr/libncweb_gelan.so.1, 351216 bytes, 686 tape blocks
x ./netmgr/libnetmgr_gelan.so symbolic link to ./libncweb_gelan.so.1
x ./netmgr/libncweb_iether.so symbolic link to ./libncweb_iether.so.1
x ./netmgr/libncweb_iether.so.1, 358384 bytes, 700 tape blocks
x ./netmgr/libnetmgr_iether.so symbolic link to ./libncweb_iether.so.1
x ./netmgr/libncweb_igelan.so symbolic link to ./libncweb_igelan.so.1
x ./netmgr/libncweb_igelan.so.1, 354144 bytes, 692 tape blocks
x ./netmgr/libnetmgr_igelan.so symbolic link to ./libncweb_igelan.so.1
x ./netmgr/libncweb_intl100.so symbolic link to ./libncweb_intl100.so.1
x ./netmgr/libncweb_intl100.so.1, 187584 bytes, 367 tape blocks
x ./netmgr/libnetmgr_intl100.so symbolic link to ./libncweb_intl100.so.1
x ./netmgr/libncweb_apa.so symbolic link to ./libnetmgr_apa.so.1
x ./netmgr/libnetmgr_apa.so symbolic link to ./libnetmgr_apa.so.1
x ./netmgr/libnetmgr_apa.so.1, 881408 bytes, 1722 tape blocks
x ./netmgr/libnetmgr_hp_apa.so symbolic link to ./libnetmgr_apa.so.1
x ./libipv6.so symbolic link to ./libipv6.so.1
x ./libipv6.so.1, 76768 bytes, 150 tape blocks
x ./libnm.so symbolic link to ./libnm.so.1
x ./libnm.so.1, 244296 bytes, 478 tape blocks
x ./libxnet.so symbolic link to ./libxnet.so.1
x ./libxnet.so.1, 96464 bytes, 189 tape blocks
x ./libxti.so symbolic link to ./libxti.so.1
x ./libxti.so.1, 298840 bytes, 584 tape blocks
x ./cra/libmscra.so symbolic link to ./libmscra.so.1
x ./cra/libmscra.so.1, 361264 bytes, 706 tape blocks
x ./cra/liblancra.so symbolic link to ./liblancra.so.1
x ./cra/liblancra.so.1, 162048 bytes, 317 tape blocks
x ./cra/libhssn_cra.so symbolic link to /usr/lib/hpux64/cra/libhssn_cra.so.1
x ./cra/libhssn_cra.so.1, 100528 bytes, 197 tape blocks
x ./libIO.so symbolic link to ./libIO.so.1
x ./libIO.so.1, 292384 bytes, 572 tape blocks
x ./libcra.so symbolic link to ./libcra.so.1
x ./libcra.so.1, 196200 bytes, 384 tape blocks
x ./libcres.a, 94982 bytes, 186 tape blocks
x ./libhg.so symbolic link to ./libhg.so.1
x ./libhg.so.1, 76664 bytes, 150 tape blocks
x ./libmxndbg.so symbolic link to ./libmxndbg.so.1
x ./libmxndbg.so.1, 82816 bytes, 162 tape blocks
x ./libolrad.so symbolic link to ./libolrad.so.1
x ./libolrad.so.1, 91656 bytes, 180 tape blocks
x ./libprocsm.so symbolic link to ./libprocsm.so.1
x ./libprocsm.so.1, 74416 bytes, 146 tape blocks
x ./libsec.so symbolic link to ./libsec.so.1
x ./libsec.so.1, 582760 bytes, 1139 tape blocks
x ./libuca.so symbolic link to ./libuca.so.1
x ./libuca.so.1, 85680 bytes, 168 tape blocks
x ./libunalign.so symbolic link to ./libunalign.so.1
x ./libunalign.so.1, 84248 bytes, 165 tape blocks
x ./libvparusr.so symbolic link to ./libvparusr.so.1
x ./libvparusr.so.1, 176000 bytes, 344 tape blocks
x ./milli.a, 52590 bytes, 103 tape blocks
x ./millikern.a, 60144 bytes, 118 tape blocks
x ./libnsl.so symbolic link to ./libnsl.so.1
x ./librpcsec_gss.sl symbolic link to ./librpcsec_gss.so.1
x ./libacps.so symbolic link to ./libacps.so.1
x ./libacps.so.1, 82480 bytes, 162 tape blocks
x ./librbac.so symbolic link to ./librbac.so.1
x ./librbac.so.1, 278936 bytes, 545 tape blocks
x ./libldap.so symbolic link to /opt/ldapux/lib/hpux64/libldap.so.1
x ./libp/libc.so symbolic link to ./libc.so.1
x ./libp/libc.so.1, 5267664 bytes, 10289 tape blocks
x ./libp/libcres.a, 102214 bytes, 200 tape blocks
x ./libp/libdlv_vxfs.so symbolic link to ./libdlv_vxfs.so.1
x ./libp/libdlv_vxfs.so.1, 71664 bytes, 140 tape blocks
x ./unix2003.o, 1848 bytes, 4 tape blocks
x ./unix95.o, 1848 bytes, 4 tape blocks
x ./unix98.o, 1848 bytes, 4 tape blocks
x ./aries64.so, 5164024 bytes, 10086 tape blocks
x ./dld.so, 1091952 bytes, 2133 tape blocks
x ./dpd/libjvm.so.bpd, 12672 bytes, 25 tape blocks
x ./libCsup.so symbolic link to ./libCsup.so.1
x ./libCsup.so.1, 677016 bytes, 1323 tape blocks
x ./libc.so symbolic link to ./libc.so.1
x ./libc.so.1, 4898520 bytes, 9568 tape blocks
x ./libcext.so symbolic link to ./libcext.so.1
x ./libcext.so.1, 70384 bytes, 138 tape blocks
x ./libcl.so symbolic link to ./libcl.so.1
x ./libcl.so.1, 69336 bytes, 136 tape blocks
x ./libcurses.so symbolic link to ./libxcurses.so.1
x ./libdl.so symbolic link to ./libdl.so.1
x ./libdl.so.1, 78488 bytes, 154 tape blocks
x ./libdld.so symbolic link to ./libdl.so.1
x ./libelf.so symbolic link to ./libelf.so.1
x ./libelf.so.1, 336656 bytes, 658 tape blocks
x ./libgen.so symbolic link to ./libgen.so.1
x ./libgen.so.1, 81904 bytes, 160 tape blocks
x ./libgprof.so symbolic link to ./libgprof.so.1
x ./libgprof.so.1, 90696 bytes, 178 tape blocks
x ./libl.so symbolic link to ./libl.so.1
x ./libl.so.1, 82720 bytes, 162 tape blocks
x ./libl_thread.so symbolic link to ./libl_thread.so.1
x ./libl_thread.so.1, 83864 bytes, 164 tape blocks
x ./libm.so symbolic link to ./libm.so.1
x ./libm.so.1, 6465904 bytes, 12629 tape blocks
x ./libnss_files.so.1, 179704 bytes, 351 tape blocks
x ./libpam.so symbolic link to ./libpam.so.1
x ./libpam.so.1, 91528 bytes, 179 tape blocks
x ./libprof.so symbolic link to ./libprof.so.1
x ./libprof.so.1, 79688 bytes, 156 tape blocks
x ./libpsm.so symbolic link to ./libpsm.so.1
x ./libpsm.so.1, 73584 bytes, 144 tape blocks
x ./libpthread.so symbolic link to ./libpthread.so.1
x ./libpthread.so.1, 1535512 bytes, 3000 tape blocks
x ./libpthread_tr.so symbolic link to ./libpthread_tr.so.1
x ./libpthread_tr.so.1, 1780504 bytes, 3478 tape blocks
x ./librt.so symbolic link to ./librt.so.1
x ./librt.so.1, 85568 bytes, 168 tape blocks
x ./librwtool.so symbolic link to ./librwtool.so.1
x ./librwtool.so.1, 3684800 bytes, 7197 tape blocks
x ./librwtool_v2.so symbolic link to ./librwtool_v2.so.1
x ./librwtool_v2.so.1, 3858512 bytes, 7537 tape blocks
x ./libsin.so symbolic link to ./libsin.so.1
x ./libsin.so.1, 77032 bytes, 151 tape blocks
x ./libstd.so symbolic link to ./libstd.so.1
x ./libstd.so.1, 538840 bytes, 1053 tape blocks
x ./libstd_v2.so symbolic link to ./libstd_v2.so.1
x ./libstd_v2.so.1, 3297648 bytes, 6441 tape blocks
x ./libstream.so symbolic link to ./libstream.so.1
x ./libstream.so.1, 660248 bytes, 1290 tape blocks
x ./libunwind.so symbolic link to ./libunwind.so.1
x ./libunwind.so.1, 635200 bytes, 1241 tape blocks
x ./libuseracct.so symbolic link to ./libuseracct.so.1
x ./libuseracct.so.1, 77800 bytes, 152 tape blocks
x ./libxcurses.so.1, 1383776 bytes, 2703 tape blocks
x ./liby.so symbolic link to ./liby.so.1
x ./liby.so.1, 73648 bytes, 144 tape blocks
x ./pa_boot64.so, 160704 bytes, 314 tape blocks
x ./uld.so, 182864 bytes, 358 tape blocks
x ./libcrypto.a symbolic link to /opt/openssl/lib/hpux64/libcrypto.a
x ./libcrypto.so symbolic link to /opt/openssl/lib/hpux64/libcrypto.so
x ./libcrypto.so.0 symbolic link to /opt/openssl/lib/hpux64/libcrypto.so.0
x ./libcrypto.so.1 symbolic link to /opt/openssl/lib/hpux64/libcrypto.so.1
x ./libssl.a symbolic link to /opt/openssl/lib/hpux64/libssl.a
x ./libssl.so symbolic link to /opt/openssl/lib/hpux64/libssl.so
x ./libssl.so.0 symbolic link to /opt/openssl/lib/hpux64/libssl.so.0
x ./libssl.so.1 symbolic link to /opt/openssl/lib/hpux64/libssl.so.1
x ./engines/lib4758cca.so symbolic link to /opt/openssl/lib/hpux64/engines/lib4758cca.so
x ./engines/libaep.so symbolic link to /opt/openssl/lib/hpux64/engines/libaep.so
x ./engines/libatalla.so symbolic link to /opt/openssl/lib/hpux64/engines/libatalla.so
x ./engines/libchil.so symbolic link to /opt/openssl/lib/hpux64/engines/libchil.so
x ./engines/libcswift.so symbolic link to /opt/openssl/lib/hpux64/engines/libcswift.so
x ./engines/libgmp.so symbolic link to /opt/openssl/lib/hpux64/engines/libgmp.so
x ./engines/libnuron.so symbolic link to /opt/openssl/lib/hpux64/engines/libnuron.so
x ./engines/libsureware.so symbolic link to /opt/openssl/lib/hpux64/engines/libsureware.so
x ./engines/libubsec.so symbolic link to /opt/openssl/lib/hpux64/engines/libubsec.so
x ./liblvml.so symbolic link to /opt/lvm/lib/hpux64/liblvml.so.1
x ./libCsup.a, 1450254 bytes, 2833 tape blocks
x ./libdas.a, 520758 bytes, 1018 tape blocks
x ./liblinkmap.a, 101594 bytes, 199 tape blocks
x ./libm.a, 8314252 bytes, 16239 tape blocks
x ./librwtool.a, 6788814 bytes, 13260 tape blocks
x ./librwtool_v2.a, 7375734 bytes, 14406 tape blocks
x ./libstd.a, 746764 bytes, 1459 tape blocks
x ./libstd_v2.a, 6554730 bytes, 12803 tape blocks
x ./libstream.a, 1103494 bytes, 2156 tape blocks
x ./X11R6/libICE.so.1, 364976 bytes, 713 tape blocks
x ./X11R6/libSM.so.1, 169360 bytes, 331 tape blocks
x ./X11R6/libX11.so.1, 4119128 bytes, 8046 tape blocks
x ./X11R6/libXIE.so.1, 269088 bytes, 526 tape blocks
x ./X11R6/libXext.so.1, 357400 bytes, 699 tape blocks
x ./X11R6/libXhp11.so.1, 221336 bytes, 433 tape blocks
x ./X11R6/libXi.so.1, 209912 bytes, 410 tape blocks
x ./X11R6/libXp.so.1, 129632 bytes, 254 tape blocks
x ./X11R6/libXt.so.1, 1396744 bytes, 2729 tape blocks
x ./X11R6/libXtst.so.1, 90520 bytes, 177 tape blocks
x ./X11R6/libICE.so symbolic link to /usr/lib/hpux64/X11R6/libICE.so.1
x ./X11R6/libSM.so symbolic link to /usr/lib/hpux64/X11R6/libSM.so.1
x ./X11R6/libX11.so symbolic link to /usr/lib/hpux64/X11R6/libX11.so.1
x ./X11R6/libXIE.so symbolic link to /usr/lib/hpux64/X11R6/libXIE.so.1
x ./X11R6/libXext.so symbolic link to /usr/lib/hpux64/X11R6/libXext.so.1
x ./X11R6/libXhp11.so symbolic link to /usr/lib/hpux64/X11R6/libXhp11.so.1
x ./X11R6/libXi.so symbolic link to /usr/lib/hpux64/X11R6/libXi.so.1
x ./X11R6/libXp.so symbolic link to /usr/lib/hpux64/X11R6/libXp.so.1
x ./X11R6/libXt.so symbolic link to /usr/lib/hpux64/X11R6/libXt.so.1
x ./X11R6/libXtst.so symbolic link to /usr/lib/hpux64/X11R6/libXtst.so.1
x ./libICE.so.1 symbolic link to ./X11R6/libICE.so.1
x ./libSM.so.1 symbolic link to ./X11R6/libSM.so.1
x ./libX11.so.1 symbolic link to ./X11R6/libX11.so.1
x ./libXIE.so.1 symbolic link to ./X11R6/libXIE.so.1
x ./libXaw.so.1 symbolic link to ../../contrib/X11R6/lib/hpux64/libXaw.so.1
x ./libXext.so.1 symbolic link to ./X11R6/libXext.so.1
x ./libXhp11.so.1 symbolic link to ./X11R6/libXhp11.so.1
x ./libXi.so.1 symbolic link to ./X11R6/libXi.so.1
x ./libXmu.so.1 symbolic link to ../../contrib/X11R6/lib/hpux64/libXmu.so.1
x ./libXp.so.1 symbolic link to ./X11R6/libXp.so.1
x ./libXt.so.1 symbolic link to ./X11R6/libXt.so.1
x ./libXtst.so.1 symbolic link to ./X11R6/libXtst.so.1
x ./libIOmt.so symbolic link to ./libIOmt.so.1
x ./libIOmt.so.1, 365296 bytes, 714 tape blocks
x ./libicod.so, 11300984 bytes, 22073 tape blocks
x ./libnsl.so.1, 1510856 bytes, 2951 tape blocks
x ./libnss_compat.so.1, 89536 bytes, 175 tape blocks
x ./libnss_dns.so.1, 91184 bytes, 179 tape blocks
x ./libnss_nis.so.1, 107248 bytes, 210 tape blocks
x ./librpcsec_gss.so.1, 99792 bytes, 195 tape blocks
x ./librpcsvc.so symbolic link to ./librpcsvc.so.1
x ./librpcsvc.so.1, 109208 bytes, 214 tape blocks
x ./libstraddr.so.1, 76384 bytes, 150 tape blocks
x ./libdcekt.so symbolic link to ./libdcekt.so.1
x ./libdcekt.so.1, 13180696 bytes, 25744 tape blocks
x ./libldap_send.so.1, 243104 bytes, 475 tape blocks
x ./libnss_ldap.so.1, 1971648 bytes, 3851 tape blocks
x ./libldap_send.so symbolic link to /usr/lib/hpux64/libldap_send.so.1
x ./gss/libgssapi_krb5.so symbolic link to ./libgssapi_krb5.so.1
x ./gss/libgssapi_krb5.so.1 symbolic link to /opt/krb5core/lib/hpux64/gss/libgssapi_krb5.so.1
x ./libcom_err.so symbolic link to ./libcom_err.so.1
x ./libcom_err.so.1 symbolic link to /opt/krb5core/lib/hpux64/libcom_err.so.1
x ./libgssapi_krb5.so symbolic link to ./gss/libgssapi_krb5.so
x ./libk5crypto.so symbolic link to ./libk5crypto.so.1
x ./libk5crypto.so.1 symbolic link to /opt/krb5core/lib/hpux64/libk5crypto.so.1
x ./libkrb5.so symbolic link to ./libkrb5.so.1
x ./libkrb5.so.1 symbolic link to /opt/krb5core/lib/hpux64/libkrb5.so.1
x ./libevm.so symbolic link to ./libevm.so.1
x ./libevm.so.1, 485840 bytes, 949 tape blocks
x ./libHBAAPI.so symbolic link to /opt/snia/lib/hpux64/libHBAAPI.so
x ./libhbaapifcd.so symbolic link to /opt/fcms/lib/hpux64/libhbaapifcd.so
x ./libhbaapifclp.so symbolic link to /opt/fcms/lib/hpux64/libhbaapifclp.so
x ./libhbaapihp.so symbolic link to /opt/fcms/lib/hpux64/libhbaapihp.so
x ./libdlv_vxfs.so symbolic link to ./libdlv_vxfs.so.1
x ./libdlv_vxfs.so.1, 71664 bytes, 140 tape blocks
x ./libsascommon.so symbolic link to /opt/sas/lib/libsascommon.so.1
x ./Motif2.1/libMrm.so.1, 486976 bytes, 952 tape blocks
x ./Motif2.1/libXm.so.1, 7007912 bytes, 13688 tape blocks
x ./Motif2.1/libMrm.so symbolic link to /usr/lib/hpux64/Motif2.1/libMrm.so.1
x ./Motif2.1/libXm.so symbolic link to /usr/lib/hpux64/Motif2.1/libXm.so.1
x ./libMrm.so.1 symbolic link to ./Motif2.1/libMrm.so.1
x ./libXm.so.1 symbolic link to ./Motif2.1/libXm.so.1
x ./libcps.a, 516320 bytes, 1009 tape blocks
x ./libcps.so symbolic link to ./libcps.so.1
x ./libcps.so.1, 304720 bytes, 596 tape blocks
x ./libF90.a, 13875552 bytes, 27101 tape blocks
x ./libF90_parallel.a, 15463940 bytes, 30204 tape blocks
x ./libF90.so symbolic link to ./libF90.so.1
x ./libF90.so.1, 10920688 bytes, 21330 tape blocks
x ./libF90_parallel.so symbolic link to ./libF90_parallel.so.1
x ./libF90_parallel.so.1, 12172192 bytes, 23774 tape blocks
x ./libIO77.a, 4147142 bytes, 8100 tape blocks
x ./libIO77.so symbolic link to ./libIO77.so.1
x ./libIO77.so.1, 2912872 bytes, 5690 tape blocks
x ./libomp.a, 129772 bytes, 254 tape blocks
x ./libomp.so symbolic link to ./libomp.so.1
x ./libomp.so.1, 96792 bytes, 190 tape blocks
x ./libU77.a, 573864 bytes, 1121 tape blocks
x ./libgss.so, 296392 bytes, 579 tape blocks
x ./libnss_dce.so.1, 84328 bytes, 165 tape blocks
x ./libJudy.a, 1284862 bytes, 2510 tape blocks
x ./libJudy.so, 973024 bytes, 1901 tape blocks
x ./libbind9stub.so symbolic link to /usr/lib/hpux64/libbind9stub.so.1
x ./libbind9stub.so.1, 91256 bytes, 179 tape blocks
x ./libsys.so symbolic link to ./libsys.so.1
x ./libsys.so.1, 70560 bytes, 138 tape blocks
x ./libMrm.so symbolic link to /usr/lib/hpux64/libMrm.so.1
x ./libXm.so symbolic link to /usr/lib/hpux64/libXm.so.1
x ./libICE.so symbolic link to /usr/lib/hpux64/libICE.so.1
x ./libSM.so symbolic link to /usr/lib/hpux64/libSM.so.1
x ./libX11.so symbolic link to /usr/lib/hpux64/libX11.so.1
x ./libXIE.so symbolic link to /usr/lib/hpux64/libXIE.so.1
x ./libXext.so symbolic link to /usr/lib/hpux64/libXext.so.1
x ./libXhp11.so symbolic link to /usr/lib/hpux64/libXhp11.so.1
x ./libXi.so symbolic link to /usr/lib/hpux64/libXi.so.1
x ./libXp.so symbolic link to /usr/lib/hpux64/libXp.so.1
x ./libXt.so symbolic link to /usr/lib/hpux64/libXt.so.1
x ./libXtst.so symbolic link to /usr/lib/hpux64/libXtst.so.1
x ./libXaw.so symbolic link to /usr/lib/hpux64/libXaw.so.1
x ./libXmu.so symbolic link to /usr/lib/hpux64/libXmu.so.1
x ./libhppac.so symbolic link to ./libhppac.so.1
x ./libhppac.so.1, 159952 bytes, 313 tape blocks
# rm lib64.tar
# cd /opt/fcms
# Dead gateway detection can’t ping the last remaining default gateway at 0xa088001 .See ndd -h ip_ire_gw_probe for more info
ll
total 7160
-rw-r–r– 1 root sys 3665920 Feb 19 14:00 fcms.tar
# tar -xvf fcms.tar
x ./include/snia_common.h, 16584 bytes, 33 tape blocks
x ./lib/hpux32/libhbaapifcd.so symbolic link to ./libhbaapifcd.so.1
x ./lib/hpux32/libhbaapifcd.so.1, 267904 bytes, 524 tape blocks
x ./lib/hpux32/libhbaapifclp.so symbolic link to ./libhbaapifclp.so.1
x ./lib/hpux32/libhbaapifclp.so.1, 294104 bytes, 575 tape blocks
x ./lib/hpux32/libhbaapihp.so symbolic link to ./libhbaapihp.so.1
x ./lib/hpux32/libhbaapihp.so.1, 263560 bytes, 515 tape blocks
x ./lib/hpux64/libhbaapifcd.so symbolic link to ./libhbaapifcd.so.1
x ./lib/hpux64/libhbaapifcd.so.1, 274096 bytes, 536 tape blocks
x ./lib/hpux64/libhbaapifclp.so symbolic link to ./libhbaapifclp.so.1
x ./lib/hpux64/libhbaapifclp.so.1, 300416 bytes, 587 tape blocks
x ./lib/hpux64/libhbaapihp.so symbolic link to ./libhbaapihp.so.1
x ./lib/hpux64/libhbaapihp.so.1, 269768 bytes, 527 tape blocks
x ./lib/pa20_64/libhbaapifcd.sl symbolic link to ./libhbaapifcd.1
x ./lib/pa20_64/libhbaapifcd.1, 102168 bytes, 200 tape blocks
x ./lib/pa20_64/libhbaapihp.sl symbolic link to ./libhbaapihp.1
x ./lib/pa20_64/libhbaapihp.1, 96176 bytes, 188 tape blocks
x ./lib/libhbaapifcd.sl symbolic link to ./libhbaapifcd.1
x ./lib/libhbaapifcd.1, 102400 bytes, 200 tape blocks
x ./lib/libhbaapihp.sl symbolic link to ./libhbaapihp.1
x ./lib/libhbaapihp.1, 98304 bytes, 192 tape blocks
x ./bin/fcddiag, 13467 bytes, 27 tape blocks
x ./bin/fcdlist, 9494 bytes, 19 tape blocks
x ./bin/fcdutil, 514048 bytes, 1004 tape blocks
x ./bin/fcmsutil, 71652 bytes, 140 tape blocks
x ./bin/fclpdiag, 12525 bytes, 25 tape blocks
x ./bin/fclplist, 6344 bytes, 13 tape blocks
x ./bin/fclputil, 644704 bytes, 1260 tape blocks
x ./bin/tddiag, 12175 bytes, 24 tape blocks
x ./bin/tdlist, 7227 bytes, 15 tape blocks
x ./bin/tdutil, 195656 bytes, 383 tape blocks
x ./config/A6826A, 302 bytes, 1 tape blocks
x ./config/A9782A, 302 bytes, 1 tape blocks
x ./config/A9784A, 302 bytes, 1 tape blocks
x ./config/AB378A, 302 bytes, 1 tape blocks
x ./config/AB379A, 302 bytes, 1 tape blocks
x ./config/AB465A, 302 bytes, 1 tape blocks
x ./config/AD193A, 302 bytes, 1 tape blocks
x ./config/AD194A, 302 bytes, 1 tape blocks
x ./config/AD300A, 302 bytes, 1 tape blocks
x ./config/vendorfcd.conf, 124 bytes, 1 tape blocks
x ./config/vendorfclp.conf, 125 bytes, 1 tape blocks
x ./config/A5158A, 187 bytes, 1 tape blocks
x ./config/A6795A, 195 bytes, 1 tape blocks
x ./config/vendor.conf, 13 bytes, 1 tape blocks
x ./tools/fcd.pl, 18960 bytes, 38 tape blocks
x ./tools/fclp.pl, 16646 bytes, 33 tape blocks
x ./tools/td.pl, 7689 bytes, 16 tape blocks
#
# rm fcms.tar
# /opt iosca ac n
H/W Path Class Description
========================================================
root
8 cell
8/0 ioa System Bus Adapter (12eb)
8/0/0 ba Local PCI-X Bus Adapter (12ee)
8/0/0/1 slot PCI Slot
8/0/1 ba Local PCI-X Bus Adapter (12ee)
8/0/1/1 slot PCI Slot
8/0/2 ba Local PCI-X Bus Adapter (12ee)
8/0/2/1 slot PCI Slot
8/0/4 ba Local PCI-X Bus Adapter (12ee)
8/0/4/1 slot PCI Slot
8/0/4/1/0 ba PCItoPCI Bridge
8/0/4/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
8/0/4/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
8/0/4/1/0/6/0 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
8/0/4/1/0/6/1 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
8/0/5 ba Local PCI-X Bus Adapter (12ee)
8/0/5/1 slot PCI Slot
8/0/5/1/0 ba PCItoPCI Bridge
8/0/5/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
8/0/5/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
8/0/5/1/0/6/0 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
8/0/5/1/0/6/1 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
8/0/6 ba Local PCI-X Bus Adapter (12ee)
8/0/6/1 slot PCI Slot
8/0/6/1/0 ba PCItoPCI Bridge
8/0/6/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
8/0/6/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
8/0/6/1/0/6/0 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
8/0/6/1/0/6/1 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
8/0/8 ba Local PCI-X Bus Adapter (12ee)
8/0/8/1 slot PCI Slot
8/0/9 ba Local PCI-X Bus Adapter (12ee)
8/0/9/1 slot PCI Slot
8/0/10 ba Local PCI-X Bus Adapter (12ee)
8/0/10/1 slot PCI Slot
8/0/12 ba Local PCI-X Bus Adapter (12ee)
8/0/12/1 slot PCI Slot
8/0/12/1/0 ba PCItoPCI Bridge
8/0/12/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
8/0/12/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
8/0/12/1/0/6/0 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
8/0/12/1/0/6/1 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
8/0/13 ba Local PCI-X Bus Adapter (12ee)
8/0/13/1 slot PCI Slot
8/0/13/1/0 ba PCItoPCI Bridge
8/0/13/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
8/0/13/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
8/0/13/1/0/6/0 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
8/0/13/1/0/6/1 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
8/0/14 ba Local PCI-X Bus Adapter (12ee)
8/0/14/1 slot PCI Slot
8/0/14/1/0 ba PCItoPCI Bridge
8/0/14/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
8/0/14/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
8/0/14/1/0/6/0 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
8/0/14/1/0/6/1 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
8/120 processor Processor
8/121 processor Processor
8/122 processor Processor
8/123 processor Processor
8/124 processor Processor
8/125 processor Processor
8/126 processor Processor
8/127 processor Processor
8/250 ba Core I/O Adapter
8/250/0 acpi_node Acpi Hardware
8/250/1 ipmi IPMI Controller
8/250/2 tty Built-in RS232C
9 cell
9/120 processor Processor
9/121 processor Processor
9/122 processor Processor
9/123 processor Processor
9/124 processor Processor
9/125 processor Processor
9/126 processor Processor
9/127 processor Processor
9/250 ba Core I/O Adapter
9/250/0 acpi_node Acpi Hardware
10 cell
10/0 ioa System Bus Adapter (12eb)
10/0/0 ba Local PCI-X Bus Adapter (12ee)
10/0/0/1 slot PCI Slot
10/0/1 ba Local PCI-X Bus Adapter (12ee)
10/0/1/1 slot PCI Slot
10/0/2 ba Local PCI-X Bus Adapter (12ee)
10/0/2/1 slot PCI Slot
10/0/4 ba Local PCI-X Bus Adapter (12ee)
10/0/4/1 slot PCI Slot
10/0/4/1/0 ba PCItoPCI Bridge
10/0/4/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
10/0/4/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
10/0/4/1/0/6/0 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
10/0/4/1/0/6/1 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
10/0/5 ba Local PCI-X Bus Adapter (12ee)
10/0/5/1 slot PCI Slot
10/0/5/1/0 ba PCItoPCI Bridge
10/0/5/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
10/0/5/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
10/0/5/1/0/6/0 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
10/0/5/1/0/6/1 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
10/0/6 ba Local PCI-X Bus Adapter (12ee)
10/0/6/1 slot PCI Slot
10/0/6/1/0 ba PCItoPCI Bridge
10/0/6/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
10/0/6/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
10/0/6/1/0/6/0 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
10/0/6/1/0/6/1 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
10/0/8 ba Local PCI-X Bus Adapter (12ee)
10/0/8/1 slot PCI Slot
10/0/9 ba Local PCI-X Bus Adapter (12ee)
10/0/9/1 slot PCI Slot
10/0/10 ba Local PCI-X Bus Adapter (12ee)
10/0/10/1 slot PCI Slot
10/0/12 ba Local PCI-X Bus Adapter (12ee)
10/0/12/1 slot PCI Slot
10/0/12/1/0 ba PCItoPCI Bridge
10/0/12/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
10/0/12/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
10/0/12/1/0/6/0 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
10/0/12/1/0/6/1 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
10/0/13 ba Local PCI-X Bus Adapter (12ee)
10/0/13/1 slot PCI Slot
10/0/13/1/0 ba PCItoPCI Bridge
10/0/13/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
10/0/13/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
10/0/13/1/0/6/0 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
10/0/13/1/0/6/1 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
10/0/14 ba Local PCI-X Bus Adapter (12ee)
10/0/14/1 slot PCI Slot
10/0/14/1/0 ba PCItoPCI Bridge
10/0/14/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
10/0/14/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
10/0/14/1/0/6/0 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
10/0/14/1/0/6/1 lan HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter
10/120 processor Processor
10/121 processor Processor
10/122 processor Processor
10/123 processor Processor
10/124 processor Processor
10/125 processor Processor
10/126 processor Processor
10/127 processor Processor
10/250 ba Core I/O Adapter
10/250/0 acpi_node Acpi Hardware
#
# ioscan
# ioscan gets you the device of the fiber card, which you can not put into fcmsutil. Bingo, you have WWN
# ioscan -fc Cfc
H/W Path Class Description
======================================================
8/0/4/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
8/0/4/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
8/0/5/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
8/0/5/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
8/0/6/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
8/0/6/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
8/0/12/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
8/0/12/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
8/0/13/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
8/0/13/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
8/0/14/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
8/0/14/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
10/0/4/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
10/0/4/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
10/0/5/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
10/0/5/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
10/0/6/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
10/0/6/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
10/0/12/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
10/0/12/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
10/0/13/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
10/0/13/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
10/0/14/1/0/4/0 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 1)
10/0/14/1/0/4/1 fc HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb FC/2-port 1000B-T Combo Adapter (FC Port 2)
# ioscan -Cfc -kn |grep dev
# ioscan -Cfc -f
/dev/fcd0
/dev/fcd1
/dev/fcd2
/dev/fcd3
/dev/fcd4
/dev/fcd5
/dev/fcd6
/dev/fcd7
/dev/fcd8
/dev/fcd9
/dev/fcd10
/dev/fcd11
/dev/fcd12
/dev/fcd13
/dev/fcd14
/dev/fcd15
/dev/fcd16
/dev/fcd17
/dev/fcd18
/dev/fcd19
/dev/fcd20
/dev/fcd21
/dev/fcd22
/dev/fcd23
# /opt/fcms/bin/fcdutil /dev/fcd23
Vendor ID is = 0x1077
Device ID is = 0x2422
PCI Sub-system Vendor ID is = 0x103C
PCI Sub-system ID is = 0x12DF
PCI Mode = PCI-X 133 MHz
ISP Code version = 4.2.2
ISP Chip version = 3
Previous Topology = UNINITIALIZED
Link Speed = UNKNOWN
Local N_Port_id is = None
Previous N_Port_id is = None
N_Port Node World Wide Name = 0x5001438002a24a3b
N_Port Port World Wide Name = 0x5001438002a24a3a
Switch Port World Wide Name = 0
Switch Node World Wide Name = 0
N_Port Symbolic Port Name = ttest_fcd23
N_Port Symbolic Node Name = ttest_HP-UX_B.11.31
Driver state = AWAITING_LINK_UP
Hardware Path is = 10/0/14/1/0/4/1
Maximum Frame Size = 2048
Driver-Firmware Dump Available = NO
Driver-Firmware Dump Timestamp = N/A
Driver Version = @(#) fcd B.11.31.0809.%319 Jul 7 2008
# for dev in $(ioscan -Fnk -Cfc |grep dev)
> do
> /opt/fcms/bin/fcdutil $dev
> done
##### snipping the output……####
Tags: Capacity Planning, fiber channel adaptor, forums.itrc.hp.com, Ignite-UX, npar, superdome, wwn
